huy

XTOOL D9S PRO KC501 KS-1 Auto Key Programmer Coding Scanner Full Diagnostic Tool

0 review
5/5

1,790.00

IMMO FUNCTIONS & Key Coding

This Key Coding scan tool set comes with D8 diagnostic tablet, EEPROM Adapter and  KC-501 Key Tool. This tool set can perform advanced IMMO keys & key chip Coding functions that is second to none in the market:

  • Read PIN code, Add Transponder Key, Add Smart Key, Disable Lost Keys, Remote Learning
  • Make Dealer Key(All Keys Lost)
  • IMMO Reset/Coding
  • IMMO Data Backup
  • Key Learning for BMW CAS1, CAS2, CAS3, CAS4
  • Read & Write Key Chips
  • Read & Write EEPROM
  • Read & Write Mercedes Infrared Keys
  • Detect Remote Frequency

 

Payment-Icon-1.png

Description

XTOOL D9S PRO + KC501 +KS-1:THE MOST PROFESSIONAL DIAGNOSE SCAN TOOL

• OE-Level Full System Diagnostic with Topplogy Module Mapping: With Topplogy Map for faster full system diagnostic to view the communication structure between modules clearly with all the situation of each system tp read/clear codes, live data PIDs graphing for all vehicle systems including Engine, Transmission, Chassis and Safety control system, Body control system, Communication and Entertainment system, etc.

• 42+ Maintenance Services & Full Special Functions: Oil Reset, EPB, BMS, SAS, DPF, Throttle Relearn, ABS Bleed, Key Coding, injector Coding, Air Suspension, Transmission Relearn, TPMS Reset, Airbag Repair, Hybrid Control Compression Test, HVAC Control Module Calibrate, Zero Point Calibration, Injector Balance Test, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, rewrite the vin on pcm, alcohol composition reset, Suspension calibration, etc.

• Advanced Programming for Benz/BMW/VW/AUDI/SKODA/FORD(off line)/MAZDA(off line): Provide best solutions for BMW, Benz, VW, Audi, SKODA, Ford and Mazda for Advanced programming, to replace the existing software/firmware in the electronic control unit, program new Advanceds, and fix software-controlled driving performance and emission issues

• Bi-Directional Control: Full control over all various vehicles components to perform active tests like EVAP test, idle relearn, injector test, cycling ABS motor pump, A/C Clutch Switch On/Off, Windows Turn On/Off, Fuel Trim Reset, Fuel Composition Reset, etc.

• Support CAN FD/DoIP/RP1210 Protocols: access new communication protocols of CANFD  and DOIP (compatible with BMW E/F/G Chassis, Jaguar, Land Rover vehicle makes)

• Advanced Advanced Coding & Refresh Hidden Functions: XTOOL D9S PRO performs Online Coding to flash the hidden features, Personalized Settings, or disable the annoying functions, such as turn off the back up beep, turn the seat belt buzzer off. And recoding the adaptive data for certain components after repairs or replacements.

• Guide Functions: With V/AG Guide Functions, D8 can perform complex functions such as special functions, Advanced coding, etc., to help your diagnostic step by step with instructions

• WIFI Connection & Wired Connection via USB Type B cable: 2.4Ghz & 5Ghz WiFi, WIFI Connection make it easy to move from the dash to the front of the car. With the USB cable along with Bluetooth, the user has convenience along with certainty that the system will work one way or another.

• 10000+ Vehicle Coverage: Covers 10000+ Vehicles includes American, European, Asian, Japanese brands.

• 3 Years Software Udpate & Support 14+ Languages & Remote Tech Support

• Auto Scan & Auto VIN: AutoVIN functions allowing you to quickly figure out Vehicle Identification No. (VIN) to perform fast diagnostic.

KC501 Features

  • Generate dealer keys
  • Read / Write car keys & key chip
  • Read / Write for Mercedes-Benz infrared key
  • Support for VW/Audi/Skoda 4th, 5th, MQB key matching
  • Support for BMW CAS1-CAS3++ key matching
  • Support for Land Rover’s smart key write coding function after 2015
  • Support for Fiat 500, Palio and other models
  • Support for Toyota/Lexus key all lost and via OBD, can realize 94, 98, 88, A8, A9, 39 simulation key generation
  • Read / Write for MCU/EEPROM chip
  • Write data to key emulators
  • Read remote frequencies
  • Read chip type & chip ID
  • Precode Transponder Keys
  • Support for Windows PC or Laptop
KS-1 Features
  • 【KS-1 For Toyota Smart Key All keys Lost】 Allows you to generate a emulated key for Toyota(94/98/88/A8/A9 chip) in all key lost situations. Can reset by reinstalling the battery.
  • 【NOTE】 KS-1 can NOT work on XTOOL Diagnostic Tools alone. Needs to be used with KC100 or KC501 Key Tool. USing KS-1+KC100 Or KS-1+KC501 For Toyota/Lexus/Scion Smart Key All keys Lost
  • 【Compatible List】XTOOL KS-1 compatible with D8/D8BT, X100 PAD3/X100 PAD3 SE, A80/A80 PRO/A80 PRO MASTER, D9/D9S PRO, X100 MAX, Work together with XTOOL Diagnostic Tool.
  • ➤Note: It needs to work together with XTOOL Scanner.
d9 pro scanner

XTOOL D9PRO Professional Diagnostic Tablet, ideal choice for Auto Mechanic & Repair shop

  • Advanced Advanced Coding & Advanced Configuration

Advanced coding capability for VW/AUDI/SKODA ONLY which performs online Coding, Component Matching, Adaptive Data Reset, Flash Hidden Functions, etc to optimize vehicle performance and customize car settings.

Flash Hidden Functions(Advanced Configuration) for BMW/VW/AUDI/SKODA/TOYOTA/LEXUS/SCION/MAZDA/FORD/LINCOLN, help refresh hidden functions to Recoding adaptive data for certain components after making repairs or replacements. You can activate the higher-level car functions and disable any annoying features. Customize some extra options such as disabled the seat belt buzzer, wind the windows down with the remote fobs.

  • Advanced Programming for Benz/BMW/VW/AUDI/SKODA/FORD(off line)/MAZDA(off line)

“Dealership” Level Advanced Programming Services to replace the existing software/firmware in the Electronic Control Units (Advanced), Recoding New Advance, Reflash Blank Advanced, Replace Old Modules, etc.

  • OE Full Systems Diagnostics

With complete capabilities for read and clean codes, live data graphing, freeze frame, access and diagnose all available modules like ABS, SRS, TPMS, Engine, Transmission, Brake System and etc.

  • Key Coding/IMMO

Recoding new keys+ Add new fobs+ keyless remote+ Disable lost keys

NOTE: for Benz/BMW/Audi/VW, or for Toyota smart key all key lost need extra Key Tool. Please come to us for more details.

  • Bi-Directional Control/Active Test

Full bi-directional control ability to verify system input/output by sending commands to vehicle’s systems/components. Such as EVAP Tests, Compression Test, turn on/off radiator fan, A/C Clutch On/Off, Fuel Pump, Window/Mirror/Door Lock Test, Pump and Value Tests, Interior & exterior lights Test, Sound horn Test, etc

  • Live Data Graphing

A line graph will allows you to see what happened at what time and in relation to what else you’re interested in, such as fuel pressure, battery voltage, cylinder misfire data, etc.

 

xtool d9

 

42+ MORE HOT USE SPECIAL FUNCTIONS

✔ Oil Reset: Reset service intervals after oil change and turn off the oil light.

✔ EPB Reset: Reset brake pads after replacement of brake system.

✔ SAS Adjustment: Perform calibration of the steering angle sensor

✔ DPF Reset: Perform DPF regeneration

✔ BMS Reset: Register the new battery to the Advanced after replacement.

✔ Throttle Relearn: Enables you to make initial settings to throttle to adjust the amount of air intake.

✔ ABS Bleeding: Perform ABS Brake Bleed function to cycle the ABS pump to bleed the air out of the ABS.

✔ Injector Coding: Coding injectors after replacement.

✔ Transmission Match: Reset the adaptive shifting points in your automatic Transmission Control Unit.

✔ Gear Learning: Crankshaft position sensor learns crankshaft tooth machining tolerance and saves to the tablet to diagnose engine misfires more accurately.

✔ Key Coding/IMMO: Disable the lo~st vehicle keys and coding a new replacement key.

✔ More Special functions added: Steering Position Sensor Calibration, Hybrid Control Compression Test, HVAC Control Module Calibrate, Zero Point Calibration, Injector balance test, Advanced Configuration, VGT Turbo Calibration, Idle Learn Reset, Alcohol Content Reset, ABS Initialization, Seat Weight Sensor Calibration, Fuel Trim Reset, Cylinder Power Balance, Crankshaft Sensors Relearn, Language change, A/F Settings, Stop/Start Reset, etc.

Note: ALL the service functions available vary acorss vehicles. Please come to us to check compatibility with car VINs.

Intelligent Topology Mapping Available on Newest APP Above V4.25.4_6.36

• Equipped with color coded module status for faster full system diagnostic results.

• View the communication structure between modules clearly with all the situation of each system.

• One click to display the fault code and enter the system exAdvancedtive function directly.

>>New Update>>New App version above V4.25.4_6.36 adding Topology Map and optimized battery performance for below Vehicle brands:

Fit for GM–>Software package V11.70;

Fit For Chrysler/Dodge/Jeep–>Software package V8.7; For VW >Software package V13.30

For Toyota–>Software package V13.70; For Nissan–>Software package V12.91; For Honda/Acura–>Software package V11.60;

For Hyundai/Kia–>Software package V13.30;

For BMW/Mini->Software package V11.95; For Benz–>Software package V20.61;

For Ford/Lincoln–>Software package V13.4; For Mazda–>Software package V12.2; More coming soon!

>>How to get the Newest APP for D9S PRO>>

1. Reboot the D9S PRO scanner and connect the D9S PRO to the internet

2. Download and install NEW APP

3. Go”Update” screen and download the newest available software packages.

Reviews

There are no reviews yet.

Be the first to review “XTOOL D9S PRO KC501 KS-1 Auto Key Programmer Coding Scanner Full Diagnostic Tool”

Your email address will not be published. Required fields are marked *

huy

+353899761945
+44 7897 015889